Menu
header photo

GREATPCB SMT LIMITED

Consider Getting PCBs From The Leading Manufacturer

Circuit boards are sheets of insulating material used for the mounting and interconnection of components in electronic gadgets. In other words, it can be said that it is an insulated board or panel on which interconnected circuits and other components are printed.
 
The advent of PCBs
 
Till the time when printed circuit boards or printed wiring boards came into being, circuits were constructed through a laborious process of point-to-point wiring. This resulted in frequent failures at wire junctions and short circuits due to aging and cracking of wire insulation. The size and cost of electronic components began to decrease, when electronic moved from vacuum tubes and relays to silicon and integrated circuits. There was a pressure to reduce the size and manufacturing costs of electronic products which drove the manufacturers to look for better solutions leading to the advent of PCBs. One of the common terms related to PCBs is Circuit board fingers which refer to the exposed metal pads along the edge of a board. The fingers are used to create a connection between two wire boards.
 
The PCB makers
 
The heavy copper PCBs from the leading PCB manufacturer called GreatPCB SMT Limited are wire boards that are printed and consist of Circuit board fingers with more than 3 ounces of copper. They understand and pay attention to the relevance of thermal management because electronic are used in the most demanding environments and operate at highest currents. That is why they manufacture heavy copper PCBs that help in the conduction of heat away from the components so that the chances of failure are reduced. Keep reading to know about the advantages of using their PCBs.
 
 
Circuit board fingers
 
 
·         Less wires and compact size
 
Their printed wire boards offer a simple platform which enables to arrange the electronic components in a compressed and efficient way. It provides compactness when creating big and complicated electronic circuits in small form factors which in turn occupies less space in devices.
 
 
·         Easy to repair and install
 
Since the electronic components and their polarities are clearly labeled on their board, in case of any damage it is easy to check and replace the particular failure components. This also allows convenience during the installation and repair process.
 
·         Saves time
 
As compared to the conventional method of wire connections, their printed wire boards takes much less time in assembling a wire.
 
Circuit board fingers
 
·         Circuits remain in place
 
All the components on their PCB are held fixed to the boards by solder flux which does not allow them to move irrespective of the movement of the boards.
 
·         Less electronic noise
 
The components in a PCB are laid properly and the electrical components are organized in such a manner that the path lengths of the electrical current between the components are less. This gives PCBs less electronic noise.
 
·         Less chance of short circuit
 
The chances of short circuits or loose connections are less as the connections are made automatically through copper tracks.
 
 
Circuit board fingers
 
 
·         Affordable
 
As PCBs are manufactured on a large scale, it is affordable.
 
Consider getting PCBs
 
 
Consider getting PCBs from the leading manufacturer, as it is a very important part of modern electronic gadgets and it is a perfect choice for the manufacturers of electronic components, instruments and equipment.
 
.
 

Go Back

Comment

Blog Search

Comments

There are currently no blog comments.